Datensicherung funktioniert nicht

Hallo, folgendes Problem. Seit ein paar Tagen funktioniert keine Datensicherung.
Starte die Sicherung ganz normal. Dann beobachte ich, das meine freier Speicherpaltz auf der SSD (108 GB/frei 35 GB) sukzessiv immer geringer wird, bis er dann auf wenige KB zusammengeschrumpft ist. Dann tut sich nichts mehr. Auch nach Stunden (>8). Es wird auch keine Sicherungsdatei erstellt. Ich muss dann eMClient beenden um den Speicherplatz wieder freizugeben.
Ist mein Datenbestand zu groß? Muss ich eine größere SSD kaufen?
Hat jemand eine Idee?
Jürgen

Hello, the following problem. Since a few days no backup is working.
I start the backup normally. Then I observe that my free space on the SSD (108 GB/free 35 GB) is successively decreasing until it shrinks to a few KB. Then nothing more happens. Even after hours (>8). Also no backup file is created. I have to quit eMClient to free the disk space again.
Is my database too big? Do I need to buy a bigger SSD?
Does anyone have any ideas?
Jürgen

Translated with DeepL Translate: The world's most accurate translator (free version)

@Juergen63

Nein, nur wenn die Festplatte defekt sein würde.

Hast Du schon ein CheckDisk gemacht ?

chkdsk c: /f in der “Eingabeaufforderung”

Oder “Prüfe” Deine Festplatte mit diesem Tool “h2testw”
Hier:

Und hast Du alle Dateien im Ordner schon geprüft in:
“C:\Users\XXXXXXX\AppData\Roaming\eM Client” ??
Schaue, ob irgendeine Datei unnormal gross ist oder nicht dahin gehört
und poste hier die Grösse der Dateien.
Sonst poste bitte einfach den ganzen Ordner mit Unterverzeichnisse,
mit Namen und Grösse der Dateien als Liste.

Oder andere Festplatte oder USB-Stick mal als Sicherungsordner testen.

Das muss nicht unbedingt an dem “eM Client” liegen.

Sonst komplettes Backup machen vom Windows, per Image Backup Software.
Image Datei mehrmals sichern extern !
Partition löschen.
Windows neu installieren und den “eM Client” installieren.
Einstellungen per XML Datei importieren und dann testen, ob das was bringt.
Dann wieder das Image Backup zurück lesen.

Eine komische Variante wäre:
Ändere mal den Ordner, wo Du die Sicherungen von “eM Client” machen lässt.
(Einstellungen ; Allgemein ; “Sicherung”)
Danach das E-Mail-Programm beenden und neu starten.
“Wizard” abbrechen und das Programm wieder beenden.
Lösche dann den Inhalt des Ordners, wo Du die Sicherungen von “eM Client” machen lässt.
Zuerst aber den Ordner wo sichern, wie externe HD, USB-Stick etc.
“eM Client” wieder starten und den Ordner für die Sicherung, wieder so einstellen wie am Anfang.
Jetzt nochmals Testen !
Die gesicherten Backups wieder zurück lesen bei Bedarf.

Schaue mal wie gross der Ordner “eM Client” unter:
“C:\Users\XXXXXXXX\AppData\Local\eM Client” ist.

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

No, only if the hard disk would be defective.

Have you already done a CheckDisk?

chkdsk c: /f “Command Prompt”

Or “Check” your hard drive with this tool “h2testw”
Here:

And have you already checked all files in the folder in:
“C:\Users\XXXXXXX\AppData\Roaming\eM Client” ??
See if any file is abnormally large or doesn’t belong there
and post the size of the files here.
Otherwise please just post the whole folder with subdirectories,
with names and sizes of the files as a list.

Or try another hard drive or USB stick as a backup folder.

This does not necessarily have to be due to the “eM Client”.

Otherwise make a complete backup of Windows, using image backup software.
Delete Partition.
Reinstall Windows and install the “eM Client”.
Import settings via XML file and then test whether that brings anything.
Then read back the image backup again.

A funny variant would be:
Change the folder where you have the backups of “eM Client” made.
(Settings ; General ; “Backup”)
Then exit and restart the e-mail program.
Cancel the “Wizard” and exit the program again.
Then delete the Contents of the folder where you have the “eM Client” backups made.
But first back up the folder where, such as external HD, USB stick, etc.
Start “eM Client” again and set the folder for the backup as it was at the beginning.
Test again now!
Read back the saved backups if necessary.

Look how big the folder “eM Client” is:
“C:\Users\XXXXXXXX\AppData\Local\eM Client” is.

Thank you Angelchc for the detailed answer. The solution: the size of the database was the problem. It was larger than the remaining free space on the SSD. Since for backup apparently the entire database is “mirrored” so to speak, backup could not be completed. I now moved partitions so that the remaining memory was large enough and lo and behold, now the backup worked as usual. Still takes 2-3 hours, but alwaysin.
Thanks again for your efforts.
Jürgen

Translated with DeepL Translate: The world's most accurate translator (free version)