# Cannot send any messages

**URL:** <https://forum.emclient.com/t/cannot-send-any-messages/75342>\
**Category:** Uncategorized\
**Created:** [August 22, 2021, 11:12pm UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342 "2021-08-22T23:12:25Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 22, 2021, 11:12pm UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/1 "2021-08-22T23:12:25Z")

</div>

HELP. Suddenly I cannot send any messages. Have tried different senders and different recipients, but always the same result:

[SMTP]Cannot send message (Email recipient not accepted by the server.)

It is not a fault with the email server. I can send messages from a different PC using the same server.

---

<div class="post-metadata">

**Author:** ![Gary](https://forum.emclient.com/user_avatar/forum.emclient.com/gary/32/20374_2.png) [@Gary](https://forum.emclient.com/u/Gary)\
**Post date:** [August 23, 2021, 5:30am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/2 "2021-08-23T05:30:56Z")

</div>

Yes, it is probably not a fault with the server; but a fault with the email address/account you are sending to.

Your error says that the recipient is not accepted by the server. Sometimes there is more information so it would be more clear as to why, but in any case, the server doesn’t accept the address you are sending to.

Go to Menu \> Settings \> General and make sure that Show Local Folders is selected. Then go to the Local Folder Outbox and delete the message if it is there.

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 5:38am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/3 "2021-08-23T05:38:56Z")

</div>

Thank you for replying, but I’m afraid that it hasn’t helped.

As I said in my posting I have tried sending from two different eM CLIENT accounts to numerous recipients that I have been sending to for years.  
.  
I checked Show Local Folders as you suggested and it is selected.

Also as I said, I can successfully send messages to the same recipients from Windows Live Mail, using the same mail server with no errors.

Any other ideas?

---

<div class="post-metadata">

**Author:** ![Gary](https://forum.emclient.com/user_avatar/forum.emclient.com/gary/32/20374_2.png) [@Gary](https://forum.emclient.com/u/Gary)\
**Post date:** [August 23, 2021, 5:43am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/4 "2021-08-23T05:43:26Z")

</div>

If you go to Menu \> Operations, then look in the Log tab for any SMTP errors, there might be more information.

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 5:58am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/5 "2021-08-23T05:58:57Z")

</div>

Here is what is in the what is in the Operations log after one attempt at sending myself a test message:

3:57:21 PM Don Crawford SMTP Connecting: To Don Crawford  
3:57:30 PM Don Crawford [SMTP] MailClient.Storage.Application.OperationException: SMTP server doesn’t support authentication.  
at MailClient.Protocols.Smtp.SmtpSendCommand.Authenticate(WorkerStatus status)  
at MailClient.Protocols.Smtp.SmtpSendCommand.Connect(WorkerStatus status)  
at MailClient.Protocols.Smtp.SmtpSendCommand.Execute(WorkerStatus status)  
at MailClient.Commands.Command.Process(WorkerStatus status)  
EnqueuedStackTrace =  
at MailClient.Protocols.Smtp.SmtpAccount.\<\>c\_\_DisplayClass3\_0.b\_\_0()  
at MailClient.Protocols.Common.AccountBase.RunIfOnline(Action actionIfOnline, Action actionIfOffline)  
at MailClient.Protocols.Smtp.SmtpAccount.SendAsync(IEnumerable`1 items, Action`1 sentItem, Action`1 completed, CancellationToken cancellationToken)  
at MailClient.Accounts.BindingAccountBase.SendInternal()  
at MailClient.Accounts.BindingAccountBase.Send()  
at MailClient.Accounts.AccountManager.SendInternal(IAccount account)  
at MailClient.Accounts.AccountManager.Send(IAccount account)  
at MailClient.UI.Forms.formMain.accountSend\_Click(Object sender, EventArgs e)  
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)  
at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)  
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)  
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)  
at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)  
at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)  
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)  
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)  
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)  
at System.Windows.Forms.Control.WndProc(Message& m)  
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)  
at System.Windows.Forms.ToolStrip.WndProc(Message& m)  
at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)  
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)  
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)  
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, WM msg, IntPtr wparam, IntPtr lparam)  
at Interop.User32.DispatchMessageW(MSG& msg)  
at System.Windows.Forms.Application.ComponentManager.Interop.Mso.IMsoComponentManager.FPushMessageLoop(UIntPtr dwComponentID, msoloop uReason, Void\* pvLoopData)  
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(msoloop reason, ApplicationContext context)  
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(msoloop reason, ApplicationContext context)  
at System.Windows.Forms.Application.Run(ApplicationContext context)  
at MailClient.Program.\<\>c.b\_\_173\_1()  
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)  
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)  
at System.Delegate.DynamicInvokeImpl(Object[] args)  
at System.Delegate.DynamicInvoke(Object[] args)  
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)  
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)  
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)  
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)  
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)  
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()  
at System.Windows.Forms.Control.WndProc(Message& m)  
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)  
at System.Windows.Forms.ContainerControl.WndProc(Message& m)  
at System.Windows.Forms.Form.WndProc(Message& m)  
at MailClient.Common.UI.Forms.BaseForm.WndProc(Message& m)  
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)  
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)  
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, WM msg, IntPtr wparam, IntPtr lparam)  
at Xilium.CefGlue.Interop.libcef.run\_message\_loop()  
at MailClient.Program.Main(String[] args)  
GUIStatus\_Exception\_Reported = True

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 6:02am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/6 "2021-08-23T06:02:59Z")

</div>

Gary, in answer to your email, No I don’t have a Pro License. If the log I just posted doesn’t help, maybe I should get a license.

---

<div class="post-metadata">

**Author:** ![Gary](https://forum.emclient.com/user_avatar/forum.emclient.com/gary/32/20374_2.png) [@Gary](https://forum.emclient.com/u/Gary)\
**Post date:** [August 23, 2021, 6:20am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/7 "2021-08-23T06:20:13Z")

</div>

> [@martlets](#):
>
> 3:57:30 PM Don Crawford [SMTP] MailClient.Storage.Application.OperationException: SMTP server doesn’t support authentication.

In eM Client, please go to Menu \> Accounts.

Go to the SMTP tab for this account and make sure that you have one of the following combinations.  
Select one combination, click on Save & Close, then restart eM Client and try send the message again.  
If that doesn’t work, try the next combination etc.

Port 587 = Force usage of SSL/TLS  
Port 25 = Use SSL/TLS if available  
Port 465 = Use SSL/TLS on special port (legacy)

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 6:37am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/8 "2021-08-23T06:37:43Z")

</div>

Tried all three suggestions. The first and third gave this error

![image](https://forum.emclient.com/uploads/default/original/2X/d/dc5bd7c6fc635cf611c73b9a2ec8c0eef15ca533.png)

The second of your suggestions gave the original error.

It may not help, but nothing that I am aware of has changed on my installation of eM CLIENT, which I have been using with no problems since May 2021.

---

<div class="post-metadata">

**Author:** ![Gary](https://forum.emclient.com/user_avatar/forum.emclient.com/gary/32/20374_2.png) [@Gary](https://forum.emclient.com/u/Gary)\
**Post date:** [August 23, 2021, 6:40am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/9 "2021-08-23T06:40:51Z")

</div>

If the account is setup as IMAP you can remove and re-add the account without any loss of data.

Go to Menu \> Accounts and remove the account. Then click on the Add Account button, enter your email address in the Automatic Setup, and complete the wizard.

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 6:57am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/10 "2021-08-23T06:57:21Z")

</div>

Forgive me for asking, but what would be the point of removing and re-installing the account? The same problem occurs with two different accounts. How could they both have been affected by the identical problem at the same time?

Also, should I leave the SMTP setting as the last of your suggestions, namely

Port 465 = Use SSL/TLS on special port (legacy)

I did not make a note of the original setting.

---

<div class="post-metadata">

**Author:** ![Gary](https://forum.emclient.com/user_avatar/forum.emclient.com/gary/32/20374_2.png) [@Gary](https://forum.emclient.com/u/Gary)\
**Post date:** [August 23, 2021, 7:10am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/11 "2021-08-23T07:10:12Z")

</div>

It could be that your provider now requires you to use an app password. In this case, entering the account password will give you the error as in your password required screenshot. You will need to check with them if an app password is required. Of course, it could also be that you just have the wrong password. Maybe you can reset the password on their web interface, and then try again.

But this is a different error to the server doesn’t support authentication one. That one could mean that the server no longer supports username/password authentication. Removing and re-adding the account will choose the best method that the server offers, and this may be oAuth, which is different to what you are currently using. But most likely it means that you have the wrong settings. That is why I gave the combinations to try.

But if you have the same issue with accounts on different servers, have you considered restarting your router?

Yes, you can leave the port set to 465, as many providers recommend that even though it is not an official SMTP port.

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 7:36am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/12 "2021-08-23T07:36:36Z")

</div>

I’m sorry if I appear to have an answer to all your suggestions, but as I said previously, I can send messages using Windows Live Mail on this and on another computer using exactly the same email accounts and passwords and using the same server, with no problems. So, am I not correct in saying that the issue cannot be anything to do with the mail server?

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 7:40am UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/13 "2021-08-23T07:40:29Z")

</div>

URGENT Now suddenly I cannot receive emails, but no error message. Can you tell me if that could be caused by changing the SMTP setting? If so, how can I fix it?

---

<div class="post-metadata">

**Author:** ![martlets](https://forum.emclient.com/letter_avatar_proxy/v4/letter/m/ecccb3/32.png) [@martlets](https://forum.emclient.com/u/martlets)\
**Post date:** [August 23, 2021, 9:02pm UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/14 "2021-08-23T21:02:09Z")

</div>

I’m pleased to let you know that I have fixed the problem.

All I had to do was to go into the Diagnostics tab under my account and click on “Diagnose”. It initially came up with “Failed” under both POP3 and SMTP, so I clicked “Fix” and after cycling though numerous options it said “Fixed” for both. So now I can send and receive.

All’s well that ends well.

---

<div class="post-metadata">

**Author:** ![Whitedog](https://forum.emclient.com/user_avatar/forum.emclient.com/whitedog/32/14663_2.png) [@Whitedog](https://forum.emclient.com/u/Whitedog)\
**Post date:** [October 24, 2024, 2:04pm UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/15 "2024-10-24T14:04:50Z")

</div>

I’ve been having a similar problem for over a month. I tried uninstalling/reinstalling the app but still experiencing the same issue. I have a Pro subscription. Below is my “send log” summary. I’m not very good with digesting this detail. Any suggestions are appreciated.

eM Client 10.1.4417+c2d4b18573 (Windows)  
9:58:28 AM [jasteil@msn.com](mailto:jasteil@msn.com) AirSync Uploading item(s) to folder ‘/Calendar’  
9:58:29 AM [jasteil@msn.com](mailto:jasteil@msn.com) [AirSync] MailClient.Accounts.ConnectionException: Found invalid data while decoding.  
—\> System.IO.InvalidDataException: Found invalid data while decoding.  
at MailClient.Protocols.AirSync.AirSyncItemSynchronizer`2.Upload(IItemUploadContext`1 uploadContext, Folder folder, IEnumerable`1 items, Int32 maxObjectsInSync, CancellationToken cancellationToken) at MailClient.Protocols.AirSync.AirSyncItemSynchronizer`2.Upload(IItemUploadContext`1 uploadContext, Folder folder, IEnumerable`1 items, CancellationToken cancellationToken)  
at MailClient.Protocols.Common.ItemSynchronizer`2.<>c __DisplayClass34_0.<EnqueueUpload>b__ 0(WorkerStatus status, CancellationToken cancellationToken) at MailClient.Protocols.AirSync.AirSyncGenericCommand.Execute(WorkerStatus status) --- End of inner exception stack trace --- at MailClient.Protocols.AirSync.AirSyncGenericCommand.Execute(WorkerStatus status) at MailClient.Commands.Command.Process(WorkerStatus status) AccountId = aacedf09-b966-4275-bb91-3aed839fafda AccountName = jasteil@msn.com RunInPlace = False EnqueuedStackTrace = at MailClient.Protocols.Common.ItemSynchronizer`2.EnqueueUpload(Folder folder, IEnumerable`1 items, Action`1 completed, CancellationToken cancellationToken)  
at MailClient.Protocols.Common.ItemSynchronizer`2.GoOnline() at MailClient.Protocols.AirSync.AirSyncAccount.GoOnlineInt() at MailClient.Protocols.Common.AccountBase.ChangeOnlineState(Boolean online, OfflineReason offlineReason) at MailClient.Protocols.Common.AccountBase.GoOnline() at MailClient.Protocols.Common.AccountBase.RunIfOnline(Action actionIfOnline, Action actionIfOffline) at MailClient.Protocols.Common.RequestIssuer.RunRequest(Action`2 action, CancellationToken cancellationToken, OperationPriority priority, Nullable`1 runInPlace, Action`1 completed, String errorFormat, Object errorParams)  
at MailClient.Protocols.Common.RequestIssuer.RunRequest(Action`2 action, CancellationToken cancellationToken, OperationPriority priority, Action`1 completed, String errorFormat, Object errorParams)  
at MailClient.Protocols.Common.RequestIssuer.RunRequest(Action`2 action, CancellationToken cancellationToken, Action`1 completed, String errorFormat, Object errorParams)  
at MailClient.Protocols.AirSync.AirSyncFolderSynchronizer.SendAsync(IEnumerable`1 items, Action`1 sentItem, Action`1 completed, CancellationToken cancellationToken) at MailClient.Protocols.AirSync.AirSyncAccount.SendAsync(IEnumerable`1 items, Action`1 sentItem, Action`1 completed, CancellationToken cancellationToken)  
at MailClient.Accounts.BindingAccountBase.SendInternal()  
at MailClient.Accounts.BindingAccountBase.Send()  
at MailClient.Accounts.AccountManager.SendAllInternal(Boolean checkIncludeInGlobalOperations)  
at MailClient.Accounts.AccountManager.SendAll(Boolean checkIncludeInGlobalOperations)  
at MailClient.UI.Forms.formMain.menuItem\_SendAll\_Click(Object sender, EventArgs e)  
at System.Windows.Forms.BindableComponent.RaiseEvent(Object key, EventArgs e)  
at System.Windows.Forms.ToolStripItem.OnClick(EventArgs e)  
at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)  
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)  
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)  
at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)  
at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)  
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)  
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)  
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)  
at System.Windows.Forms.Control.WndProc(Message& m)  
at System.Windows.Forms.ToolStrip.WndProc(Message& m)  
at MailClient.Common.UI.Controls.ContextMenuStripEx.WndProc(Message& m)  
at System.Windows.Forms.NativeWindow.Callback(HWND hWnd, MessageId msg, WPARAM wparam, LPARAM lparam)  
at Windows.Win32.PInvoke.DispatchMessage(MSG\* lpMsg)  
at System.Windows.Forms.Application.ComponentManager.Microsoft.Office.IMsoComponentManager.FPushMessageLoop(UIntPtr dwComponentID, msoloop uReason, Void\* pvLoopData)  
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(msoloop reason, ApplicationContext context)  
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(msoloop reason, ApplicationContext context)  
at System.Windows.Forms.Application.Run(ApplicationContext context)  
at MailClient.Program.\<\>c.b\_\_205\_3()  
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)  
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)  
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)  
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)  
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)  
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()  
at System.Windows.Forms.Control.WndProc(Message& m)  
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)  
at System.Windows.Forms.ContainerControl.WndProc(Message& m)  
at System.Windows.Forms.Form.WndProc(Message& m)  
at MailClient.Common.UI.Forms.BaseForm.WndProc(Message& m)  
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)  
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)  
at System.Windows.Forms.NativeWindow.Callback(HWND hWnd, MessageId msg, WPARAM wparam, LPARAM lparam)  
at Xilium.CefGlue.Interop.libcef.run\_message\_loop()  
at MailClient.Program.Main(String args)  
GUIStatus\_Exception\_Reported = True

---

<div class="post-metadata">

**Author:** ![Gary](https://forum.emclient.com/user_avatar/forum.emclient.com/gary/32/20374_2.png) [@Gary](https://forum.emclient.com/u/Gary)\
**Post date:** [October 24, 2024, 2:08pm UTC](https://forum.emclient.com/t/cannot-send-any-messages/75342/16 "2024-10-24T14:08:15Z")

</div>

> [@Whitedog](#):
>
> 9:58:29 AM [jasteil@msn.com](mailto:jasteil@msn.com) [AirSync] MailClient.Accounts.ConnectionException: Found invalid data while decoding.

Please see:

> [@Outlook error \[AirSync\] Synchronization error (SyncStateNotFound)](https://forum.emclient.com/t/outlook-error-airsync-synchronization-error-syncstatenotfound/101219):
>
> Recently, we have seen a lot of reports of Outlook calendar issues, the error usually looks like this: [AirSync] Synchronization error (SyncStateNotFound) In the log the error can also include details like Found invalid data while decoding. and Folder hierarchy changed. We are aware of this error but unfortunately had no luck replicating it yet or finding the real cause yet. The error usually means the server lost sync data for a particular device and account. That should normally happen o…
